Knitted Andy Pandy Romper
The Knitted Andy Pandy Romper is simply adorable for your little one! With its charming design and cozy feel, it's perfect for playtime or a casual day out. The soft, high-quality knit ensures your baby stays comfortable and stylish at the same time. The romper's sweet colors and cute patterns are sure to brighten up any day. Whether your baby is crawling, toddling, or simply relaxing, this romper is a delightful choice. It's a wonderful addition to any baby's wardrobe and is bound to bring smiles wherever your little one goes.
Materials
- 2 x 50g ball yarn A (white),
- 1 x 50g ball yarn B (blue)
- Pairs of 2½mm (UK 12) and 3mm (UK 11) needles.
Tension
22sts x 38 rows to 4 ins in over garter stitch pattern on 3mm needles.
Use smaller or larger needles to obtain the correct tension.
Size matters
Instructions given for age 3 months.
Chest 42 cms,
(17 inches).
Abbreviations
- k2tog/k3tog: knit 2 or 3 sts together.
- yfwd, k2tog: yarn forward - bring the yarn to the front of the work and when you knit the following 2 stitches together, you will have created an extra stitch, in a way that makes an eyelet hole.
- yrn, p2tog: yarn round needle - as yfwd but for purl stitches.
- Sl 1: slip 1 stitch
- Sl 1, k1/k2tog, psso: slip 1, knit 1/k2tog, pass the slipped stitch over, (you decrease 1 or 2 sts).
A word on the wool.
The original yarn was standard double knitting with good yardage of 126 yards (115 meters) - so you may need 3 balls of the main colour if substituting.
Instructions
The romper is easy to knit, though - like exam questions - make sure you read the pattern and understand the pictures of the pieces clearly before you start.
Pattern stitches
Garter Stitch: every row knitted.
Stocking stitch: 1 row knit; 1 row purl.
Striped pattern: 4 rows in white in stocking stitch, 2 rows in blue in garter stitch (both rows knitted). Repeat these 6 rows to form the stripes.
Trouser legs
This section is worked sideways in one piece up to the armhole. Dotted lines in picture show the centre sides and the ankle borders.
Using 3mm needles and white yarn (A) , cast on 34 sts and knit 3 rows of striped pattern.
Next row (wrong side) : Cast on 47 sts and purl across these and to end of row. [81 sts]
Continue in striped pattern, shaping waist by decreasing 1 stitch at the beginning of the 9th and every following 10th row until 77 sts remain.
Work straight until leg measures 23cm (9 inches) from the beginning, ending with wrong side facing.
[Editor's note: this is about 87 rows; 14 blue ridges ending on row 3 of the pattern.]
Next row (wrong side) : Cast off 47 sts and purl to end of row. [30 sts]
Work straight on these 30 sts for 2 cm (¾ inch) ending with wrong side facing.
[Editor's note: this is about 9 rows; 2 more blue ridges ending on row 1 of the pattern.]
Next row (wrong side) : Cast on 47 sts and purl across these and to end of row. [77 sts]
Work straight until section measures 36 cms (14¼ inches) from the beginning, ending with right side facing.
Start shaping the waist again by increasing 1 stitch at the beginning of the next and every following 10th row until there are 81 sts.
[Editor's note: From now on, you can judge where to start increasing and casting off by folding your piece at the centre and matching the stripes.]
Work straight until section measures 47 cms (18½ inches) from the beginning, ending with wrong side facing.
[Editor's note: this is finishing on row 1 of the pattern.]
Next row (wrong side) : Cast off 47 sts and purl to end of row. [34 sts]
Work 2 rows stocking stitch in white (A).
Cast off.
Ankle Borders
With 2½mm needles and white yarn A, knit up 70 sts along lower edge of leg.
Next row: K1; (k2tog) 34 times; k1. [36 sts]
Now work in garter stitch for 2 cm (¾ inch).
Cast off.
Left Front
With 3mm needles and white yarn A throughout, cast on 53 sts and work 1 cm (½ inch) in garter stitch.
Next row (right side): Knit.
Next row: K4, purl to last 4 sts; k4.
Next row: K4, sl 1, k2tog, psso, knit to end. [51 sts]
Next row: K4, purl to last 4 sts; k4.
Next row: K4, SL 1, k2tog, psso, knit to the last 6 sts; k2tog, k4.
Next row: K4, purl to last 4 sts; k4.
Next row: K4, SL 1, k1, psso, knit to end. [47 sts]
Next row: K4, purl to last 4 sts; k4.
Repeat these last 4 rows until 11 sts remain.
Next row: K3, SL 1, k2tog, psso, k3tog, k2. [7 sts]
Next row: K2, p3; k2.
Next row: K2, SL 1, k2tog, psso, k2. [5 sts]
Next row: K2, p1; k2.
Next row: K1, SL 1, k2tog, psso, k1. [3 sts]
Next row: K3.
Cast off.
Right Back
Work as for Left front.
Right Front
With 3mm needles and white yarn A throughout, cast on 53 sts and work 1 cm (½ inch) in garter stitch.
Next row (right side): Knit.
Next row: K4, purl to last 4 sts; k4.
Next row: Knit to the last 7 sts; k3tog, k4. [51 sts]
Next row: K4, purl to last 4 sts; k4.
Next row: K4, SL 1, k1, psso, knit to the last 7 sts; k3tog, k4.
Next row: K4, purl to last 4 sts; k4.
Next row: Knit to the last 6 sts; k2tog, k4. [47 sts]
Next row: K4, purl to last 4 sts; k4.
Rep these last 4 rows until 11 sts remain.
Next row: K2, SL 1, k2tog, psso, k3tog, k3. [7 sts]
Next row: K2, p3; k2.
Next row: K2, k3tog, k2. [5 sts]
Next row: K2, p1; k2.
Next row: K1, k3tog, psso, k1. [3 sts]
Next row: K3.
Cast off.
Left Back
Work as for Right front.
Making Up
Join centre back seam and leg seams.
Placing left front over right front and right back over left back, sew bodice pieces to trousers.
[Editor's note: It's not altogether clear what is meant by "left" and "right" here - both in the instructions and in the making up. Convention says that it means from the point of view of the person (or baby) wearing it. However the pictures imply that it is as you are looking at the romper. It does not matter of course - do what you like best - but be consistent. ]
Make twisted cords and small pom-poms, and attach to shoulders for fastenings.
[Editor's note: You could use press studs here - the sort that you apply with a gripper tool - and add the pom-poms as the decoration (I actually sewed the shoulders together and adapted the leg opening - see below).]
Adapting the leg seams
I think it is very awkward to put a small baby into trousers in the conventional way. Many of these vintage baby patterns from the 1980s have leg openings which I think are much more practical, so I adapted this pattern. I chose buttons but you can apply press studs if you think that is safer.
Instead of sewing the inside leg seams I picked up 111 stitches all around each side and knitted a few rows in 3 x 3 rib, working as follows:
Row 1: K3, *P3, K3; repeat from * to end of row.
Row 2: P3, *K3, P3; repeat from * to end of row.
Repeat these last 2 rows once and cast off in rib
For the other side I inserted a button hole row:
Work rows 1 and 2 in rib as before.
Next (buttonhole) row: K3, (P1, yrn, P2tog), K3, P3; (K1, yfwd, K2tog);* P3, K3, (P1, yrn, P2tog), K3, P3; (K1, yfwd, K2tog); repeat from * once, (6 buttonholes worked), then,
P3, (K1, yfwd, K2tog), P3, (centre buttonhole worked), then,
(K1, yfwd, K2tog), P3, K3, (P1, yrn, P2tog), * K3, P3, (K1, yfwd, K2tog), P3, K3, (P1, yrn, P2tog); repeat from * once, K3.
Work row 2 again, then row one, and cast off in rib.